[RidiculousM]

I'm about to prime & paint the interior of my 8 QB fuselage and would like any advice/ideas on the best way to remove the oily residue from shipping and prep for priming. It doesn't seem like Dawn soapy water and scotch brite pads get it off completely.

I tried Alumiprep33 and then rinsed and that seemed to work well to remove the residue. I plan to use Alumiprep33 and scotch brite pads, then Alidine, then PPG Super Korapon, then PPG paint. Any other methods(acetone/Colman fuel etc) or suggestions would be appreciated.

Thanks again
Mike