[Weasel]

Can someone here point me in the right direction for a FAB gasket to fit the flange of a Precision Airmotive EX5VA1 fuel controller? its not the same at a Bendix RSA-5. I don't even have a part number to search with banging my head on this one

 

[clam]

Can someone here point me in the right direction for a FAB gasket to fit the flange of a Precision Airmotive EX5VA1 fuel controller? its not the same at a Bendix RSA-5. I don't even have a part number to search with banging my head on this one

Couldn't find a p/n in the installation manual, but here's a photo of the 2 gaskets that came with the servo. I suspect you need the larger gasket, the N-8090.

 

[flynwest]

Gaskets

Call Don at airflow performance or you may get them on his web site.

 

[Weasel]

Call Don at airflow performance or you may get them on his web site.

Thanks will give him a call.

On the website there is gaskets for a RSA-5 and the Airflow FM series. If I knew the precision was the same it would help.

 

[Weasel]

Couldn't find a p/n in the installation manual, but here's a photo of the 2 gaskets that came with the servo. I suspect you need the larger gasket, the N-8090.

Thanks. The big one is what I need but N-8090 is the type of material.

 

[n700jl]

Servo to air box gasket PN

The only number I could come up with is a Cessna number 2050005-1