cjensen
Well Known Member
I'm almost ready to flip the canoe on my 7, but I have a question on which rivets along the main longeron can be set before I turn it over. I've set the one's in the aft fuselage near the 710 bulkhead and aft. I've also set the 'keeper' (hole between holes) rivets in the tailcone section.
My question has to do with the area ahead of the 705 bulkhead, and the 902 bulkhead. In this pic (shamlessly taken from Dan's site), it looks like the rivets have been set in the area described above, since cleco's are absent in the area.
Even though things are getting nice and firm in the fuselage, I'd like to have as many set as possible before I flip it over.
__________________
My question has to do with the area ahead of the 705 bulkhead, and the 902 bulkhead. In this pic (shamlessly taken from Dan's site), it looks like the rivets have been set in the area described above, since cleco's are absent in the area.
Even though things are getting nice and firm in the fuselage, I'd like to have as many set as possible before I flip it over.
__________________