Geico266
Well Known Member
I have not seen this posted before.
Page 15-02 Step #9 = Select one of each of the W-1208-L Nose Ribs and W-1208-R Nose Ribs with the aft and forward trimmed flanges. (These are the two Nose Ribs you attach 3 nutplates one.)
Then on page 15-05 Step #4: Cleco then rivet the forward trimmed W-1208-L Nose Rib with the attached nutplates to the attach angle.
There are holes in main spare to rivet the after flange of the Nose Rib to, but you cut it off in first step I mention above.
The diagram on page 15 shows the missing flange on the part and riveted to the main spare.
Jim! I hope you haven't closed up your left wing yet!
Page 15-02 Step #9 = Select one of each of the W-1208-L Nose Ribs and W-1208-R Nose Ribs with the aft and forward trimmed flanges. (These are the two Nose Ribs you attach 3 nutplates one.)
Then on page 15-05 Step #4: Cleco then rivet the forward trimmed W-1208-L Nose Rib with the attached nutplates to the attach angle.
There are holes in main spare to rivet the after flange of the Nose Rib to, but you cut it off in first step I mention above.
The diagram on page 15 shows the missing flange on the part and riveted to the main spare.
Jim! I hope you haven't closed up your left wing yet!
Last edited: