cleve_thompson
Well Known Member
We just started on our baffles today and we found that the fit around the engine of the various parts was pretty good. However, the fit of the front side and bottom pieces were not good at all. They fit the engine but are way too long to even trial fit. We have cut off approx. 1.5 inches of the front side baffle using a contour duplicator and are still way off. The bottom is even further off and the contour is also way off.
I have an O-320 with a fixed pitch prop in a RV9A. Is this to be expected or are the pieces for another cowl.
I have pic's but can't seem to be able to add them to the message.
I have an O-320 with a fixed pitch prop in a RV9A. Is this to be expected or are the pieces for another cowl.
I have pic's but can't seem to be able to add them to the message.