Rhino889 Well Known Member May 12, 2011 #1 For anyone with polished/chromed Grove gear legs: What method or process did you use? Would you have done it another way? Thanks, Scott
For anyone with polished/chromed Grove gear legs: What method or process did you use? Would you have done it another way? Thanks, Scott
Dave Stephens Active Member May 12, 2011 #2 I took mine to a local polisher, they look good but you have to give them a polish/wax every month or so to keep them looking nice Dave http://s1110.photobucket.com/albums/h459/davestephens/?start=all
I took mine to a local polisher, they look good but you have to give them a polish/wax every month or so to keep them looking nice Dave http://s1110.photobucket.com/albums/h459/davestephens/?start=all
Bruce Well Known Member Friend May 12, 2011 #3 I would start with Nuvite G6. That will knock it down real quick. Then the standard after that F7,C,A,S
I would start with Nuvite G6. That will knock it down real quick. Then the standard after that F7,C,A,S