Thought I'd kinda re hash this problem here I've got in case some fresh minds pass by.
I have a Plasma 11 on the r/h side of a Lyc IO360 and a S4LN-21 Mag on the left side.
When cold say for the first start of a morning after priming I always get a kick back, sometimes several times before it spins over continuously and starts.
Got no issues, Std Lyc hot start proceedure. Most likely a timing issue but not sure. The Bendix Mag has been checked and working, the Plasma I'm not sure about. Will disconnect each one in turn to see what happens but thought I'd pass by here first, anyone? Batt/starter not very old.
Thanks.
I have a Plasma 11 on the r/h side of a Lyc IO360 and a S4LN-21 Mag on the left side.
When cold say for the first start of a morning after priming I always get a kick back, sometimes several times before it spins over continuously and starts.
Got no issues, Std Lyc hot start proceedure. Most likely a timing issue but not sure. The Bendix Mag has been checked and working, the Plasma I'm not sure about. Will disconnect each one in turn to see what happens but thought I'd pass by here first, anyone? Batt/starter not very old.
Thanks.