clevtool
Well Known Member
Van's is in the process of changing the plans 09-10, but currently it says to notch a yoke to fit E-00907. This has resulted in several calls to us to buy this yoke already notched. However if you bought or plan to buy our standard kit/standard 3" yoke it will work fine without a notch. The yoke shown in the Van's plans is a 'heavy duty' yoke designed to set up to 3/16" rivets. These yokes can be identified by measuring the thickness of the 'base' where the set holder actuates through. The base of 1" is standard, the 1-1/4" is 'heavy duty'. See the illustration below for how the two yokes interact with the E-00901.
![14%20Yoke%20Mod%20-%20normal%20view.png](/community/proxy.php?image=https%3A%2F%2Fwww.dropbox.com%2Fs%2Fz0vpnot1589o4t7%2F14%2520Yoke%2520Mod%2520-%2520normal%2520view.png%3Fdl%3D0&hash=19a9003bc58e2c8d36464922146d828c)
![14%20Yoke%20Mod%20-%203d%20view.png](/community/proxy.php?image=https%3A%2F%2Fwww.dropbox.com%2Fs%2Fjcswrdvplmysi1q%2F14%2520Yoke%2520Mod%2520-%25203d%2520view.png%3Fdl%3D0&hash=1b5fdcab313baa7a5f3236b4b7880457)
Last edited: