PAGE 25-4 Step 6 requires you to 'Rivet the Mid Seat Rail Support Subassemblies, F-1004C-L and -R Center Section Bulkheads and F-1004N Stiffener Angles to the F-1004A Center Section Bulkhead per the callouts in Figure 2.'
Figure 2 in the plans (Rev 1 Date 1/7/21) omits the quantity and rivets to be used. The older plans (Rev 0 Date 7/24/14) shows the rivets and places.
Figure 2 in the plans (Rev 1 Date 1/7/21) omits the quantity and rivets to be used. The older plans (Rev 0 Date 7/24/14) shows the rivets and places.
