S stneki Well Known Member Patron Jul 5, 2016 #1 Need help. Looks like the adhesive gave out on the back of the over voltage modual. What should I use to reattach and what orientation should I use? Thanks. Steve
Need help. Looks like the adhesive gave out on the back of the over voltage modual. What should I use to reattach and what orientation should I use? Thanks. Steve
AltonD Well Known Member Jul 6, 2016 #2 You can get double sided tape for the aviation isle at your local Lowes. I cannot see where orientation would matter for this. But, I do not have one.
You can get double sided tape for the aviation isle at your local Lowes. I cannot see where orientation would matter for this. But, I do not have one.
bret Well Known Member Jul 6, 2016 #3 If it is near heat, tape will not last, I would sand, clean with carb cleaner, and use Ultra Black RTV let it set 24 hrs I have mangled sheet metal engine and diff covers trying to separate this sealant. good stuff ;-)
If it is near heat, tape will not last, I would sand, clean with carb cleaner, and use Ultra Black RTV let it set 24 hrs I have mangled sheet metal engine and diff covers trying to separate this sealant. good stuff ;-)