DakotaHawk
Well Known Member
I'm wiring my Plane Power alternator - pretty simple to do with the B&C regulator, but there's one line in the PP installation instructions that has me wondering.
"7. If aircraft is equipped with an "alternator out light" circuit, connect that wire to the AUX terminal..."
So my question is - Does the AUX terminal put out 13.8V when the alternator is out, or does it go to ground?
Either way is easy to complete - just need to know if the other end of the lamp gets a ground or 13.8V.
Thanks in advance
"7. If aircraft is equipped with an "alternator out light" circuit, connect that wire to the AUX terminal..."
So my question is - Does the AUX terminal put out 13.8V when the alternator is out, or does it go to ground?
Either way is easy to complete - just need to know if the other end of the lamp gets a ground or 13.8V.
Thanks in advance