Radomir
Well Known Member
I was just looking at my PCU governor and noticed that the arm isn't springing to the high RPM stop... I was told that it should be doing that if the cable breaks etc.. Mine isn't even close to springing forward when the arm is half-way between stops..
I made a little video that shows the behavior.. but I don't know if this is how it's supposed to be or not..
http://www.youtube.com/watch?v=D8jY0l_uS1w
PS.. The cause seems to be that the coil spring is binding on the housing and that's why the arm isn't springing forward... again.. not sure if this is "normal" or not..
PPS... this is a brand new never installed unit from that group buy..
I made a little video that shows the behavior.. but I don't know if this is how it's supposed to be or not..
http://www.youtube.com/watch?v=D8jY0l_uS1w
PS.. The cause seems to be that the coil spring is binding on the housing and that's why the arm isn't springing forward... again.. not sure if this is "normal" or not..
PPS... this is a brand new never installed unit from that group buy..