Hello, after talking to many people and thinking long and hard I have come up with two options that I am considering. Right now I think I am leaning towards option one with the Dynon SV com due to some sweet features in it but I am certainly not opposed to option two if someone has compelling reasons.
In either case I would greatly appreciate you all looking over the panel as I have it laid out and let me know if I missed anything I need or what you might do differently with the layout.
I am planning my panel for IFR but it will initially be VFR. What does this mean you ask? I want it fully wired for the IFR version so I can just drop the components in. The G5 on the left will initially be a simple airspeed indicator that uses the same size hole. The 430W on the bottom very well could be a GTN 650 instead. Other than those two items everything else should be in the VFR configuration as well.
Finally, the labeling around the switches could change, I'm not super thrilled with how I have it laid out around the master and mag switches right now.
Thanks everyone for your input!!!
Platform:
-RV-7A slider
-IO-360-M1B
-dual mags
-constant speed
Items common to both:
-dual HDX screens
-GMA245 audio panel
-all switches are Honeywell TL series
-master and mag switches are locking
-upper right are USB extension ports for the HDX screens
-lower right is a power plug for IPAD, etc.
Option 1 - Dynon SV com
dynon by Jereme Carne, on Flickr
Option 2 - GTR200 com
garmin by Jereme Carne, on Flickr
In either case I would greatly appreciate you all looking over the panel as I have it laid out and let me know if I missed anything I need or what you might do differently with the layout.
I am planning my panel for IFR but it will initially be VFR. What does this mean you ask? I want it fully wired for the IFR version so I can just drop the components in. The G5 on the left will initially be a simple airspeed indicator that uses the same size hole. The 430W on the bottom very well could be a GTN 650 instead. Other than those two items everything else should be in the VFR configuration as well.
Finally, the labeling around the switches could change, I'm not super thrilled with how I have it laid out around the master and mag switches right now.
Thanks everyone for your input!!!
Platform:
-RV-7A slider
-IO-360-M1B
-dual mags
-constant speed
Items common to both:
-dual HDX screens
-GMA245 audio panel
-all switches are Honeywell TL series
-master and mag switches are locking
-upper right are USB extension ports for the HDX screens
-lower right is a power plug for IPAD, etc.
Option 1 - Dynon SV com
![](/community/proxy.php?image=https%3A%2F%2Flive.staticflickr.com%2F65535%2F48503604101_cbf9ff223c_h.jpg&hash=3c6f4507a2661b3b3bd49680295900f8)
Option 2 - GTR200 com
![](/community/proxy.php?image=https%3A%2F%2Flive.staticflickr.com%2F65535%2F48503771792_53063a6d83_h.jpg&hash=7e589eea7ba410748afcf0d25c776487)
Last edited: