petehowell Well Known Member Jul 30, 2005 #1 Does any one know the required panel cutout size for the GRT EIS 4000? TIA - Pete
R RV_7A Well Known Member Jul 30, 2005 #2 If you are going through the front it requires. 2 9/16" x 5 1/8" I mounted it on the backside, if you go this route the size of the hole will vary.
If you are going through the front it requires. 2 9/16" x 5 1/8" I mounted it on the backside, if you go this route the size of the hole will vary.
