I just primed my VS with AKZO and there are some small areas with orange peel that I would like to remove. What is best way to remove and respray small areas without leaving marks in the primer coat. Can the paint be blended somehow?
It is on the spars of the VS. Not the outside of the skin. Some may be visible at a few locations, so I was going to try and sand it out and respray the small areas.
It is on the spars of the VS. Not the outside of the skin. Some may be visible at a few locations, so I was going to try and sand it out and respray the small areas.
Smooth out orange peel with scotchbrite pad. Try and do before primer cures. Maybe after and hour or so.