Working through my first practice kit. Referencing the attached completed kit picture I found on the forum, as well as the print supplied with my kit.
The print references 5 An426D3-3.5 rivets, which I noted on the print, but the actual completed piece has 6. In addition, the one hole I circled is bigger than the others for some reason.
My first shot at this so I want to be sure I am understanding what I'm looking at.... basically a sanity check.
Thanks !
Note: Additional picture added to better describe the concern. I should have done this on my initial posting..
The print references 5 An426D3-3.5 rivets, which I noted on the print, but the actual completed piece has 6. In addition, the one hole I circled is bigger than the others for some reason.
My first shot at this so I want to be sure I am understanding what I'm looking at.... basically a sanity check.
Thanks !
Note: Additional picture added to better describe the concern. I should have done this on my initial posting..
Attachments
Last edited: