claycookiemonster
Well Known Member
My project 8 was purchased originally in 2007. I'm finally getting to the fiberglass tips, and they are the original white gelcoat version. While preparing to drill one of the HS tips today, a chunk of gelcoat chipped off in my hands. Not confidence inspiring.
So:
1. Repair and recoat the flaw and wait for future chips elsewhere?
2. Inspect and poke and prod all other fiberglass parts to find flaws now?
3. Bag the old white tips and order newer grey ones?
I know they're all dimensionally the same, but is there any other change in the newer grey ones to make them a better choice over white ones who have not had an easy life and are already 15 years old?
So:
1. Repair and recoat the flaw and wait for future chips elsewhere?
2. Inspect and poke and prod all other fiberglass parts to find flaws now?
3. Bag the old white tips and order newer grey ones?
I know they're all dimensionally the same, but is there any other change in the newer grey ones to make them a better choice over white ones who have not had an easy life and are already 15 years old?