Recently my Rotax 912 ULS and Dynon 180 Oil Temperature system has gone wild at altitude. Doesn't seem to happen on startup and warmup or for the first few minutes. Then the needle jumps all over going down to 100 degrees and the scale goes to warmup, etc. Then comes back for a while, etc.
I checked the connection to the temp sensor and it seems OK, and haven't traced it back to the Dynon, hoping someone has had the same problem and can show the way. I am not the builder, so I have second owner problems of wondering what the builder did on my RV-12 EAB. Help Mark
I checked the connection to the temp sensor and it seems OK, and haven't traced it back to the Dynon, hoping someone has had the same problem and can show the way. I am not the builder, so I have second owner problems of wondering what the builder did on my RV-12 EAB. Help Mark