I've seen the oil pressure range that Lycoming publishes. I've have an O-360 ECI Titan engine that came from the builder set for the low 70s. It generally settles in at 73 psi. What thoughts do others have on a good operating oil pressure?
I've got the upper through bolt just forward of #1 cylinder that seems to be leaking, starting about 20 hours ago. I just wondered if 73 psi was higher than typical and might be a cause of the leak.
Thanks, Mike
I've got the upper through bolt just forward of #1 cylinder that seems to be leaking, starting about 20 hours ago. I just wondered if 73 psi was higher than typical and might be a cause of the leak.
Thanks, Mike