[clutch22]

I am installing the oil and fuel transducer mount on my RV-10. I will have a G3x Touch system. I'm not sure what I should install for my oil pressure sender.
The plans say to either install a plug, or an "IE SPDT PRES-15 SW". Looking at the garmin install manual, it looks like maybe they call for this - Kavlico P4055-150G-E4A ???

 

[Auburntsts]

Yes, the Kavlico transducers in the Garmin sensor kit replace the "IE SPDT PRES-15 SW" called for in the plans. Also despite what the diagram shows, it doesn't matter which port is used for which sensor nor which hole in a given port gets the AN fitting, plug, or sensor. For example the port labeled oil pressure in the diagram I used for manifold pressure. However, I did mount all of my sensors to the horizontal port holes as shown in the diagram and the Garmin install manual with either a plug or AN fitting in the top and bottom holes.