Cfrisella Well Known Member Jul 13, 2011 #1 Can someone tell me what diameter fire sleeve will slip over the oil cooler hoses without being too loose. I was thinking 1 inche.
Can someone tell me what diameter fire sleeve will slip over the oil cooler hoses without being too loose. I was thinking 1 inche.
GAHco Well Known Member Jul 14, 2011 #2 This Should Help! Th sleeve should not be real tight on the hose so as to allow it to bend and flex during installation and service. For Selection seehttp://www.gen-aircraft-hardware.com/images/pdf/firesleeve.pdf
This Should Help! Th sleeve should not be real tight on the hose so as to allow it to bend and flex during installation and service. For Selection seehttp://www.gen-aircraft-hardware.com/images/pdf/firesleeve.pdf
TS Flightlines Well Known Member Advertiser Jul 14, 2011 #3 Depends on the type of hose-- Aeroquip 303/ Stratoflex 111 -8 uses -14 firesleeve (-12 works too, but tight), teflon hose uses -10 firesleeve (-8 fits real snug). The Stratoflex firesleeve is more flexible than the Aeroquip ---if that helps. Tom
Depends on the type of hose-- Aeroquip 303/ Stratoflex 111 -8 uses -14 firesleeve (-12 works too, but tight), teflon hose uses -10 firesleeve (-8 fits real snug). The Stratoflex firesleeve is more flexible than the Aeroquip ---if that helps. Tom