What is the preferred method of solving an issue with the oil door not opening? I seen two different methods on a few threads.
1) Trim 1/16 of the cowling opening to allow the door to open
Con: will leave 1/16 gap between the door and the opening
2) Open the hinge bolt holes to allow the door to open.
Con. Will leave play in the door hinge
1) Trim 1/16 of the cowling opening to allow the door to open
Con: will leave 1/16 gap between the door and the opening
2) Open the hinge bolt holes to allow the door to open.
Con. Will leave play in the door hinge