I'm finishing up an RV6A and an A&P friend was looking it over for me. He recommended moving my oil cooler from the lower baffle at the left inlet since this is a low pressure area, and he thought it would not get enough dense air.
The front location is shown as an option in my plans, and I have a scoop to direct more air through the oil cooler. What my friend said makes sense, but I was just checking to see if others had had success with the front location before I change it up. I'm in Baton Rouge where high temps are common.
The front location is shown as an option in my plans, and I have a scoop to direct more air through the oil cooler. What my friend said makes sense, but I was just checking to see if others had had success with the front location before I change it up. I'm in Baton Rouge where high temps are common.