Gash
Well Known Member
I recently spilled a bit of oil when removing my oil filter. Some of the oil ran down a wire bundle and got inside the 3 spade connectors for the Red Cube fuel flow sender. I cleaned it up with a rag as best I could, but didn't think much of it. There appears to be some oil inside the connectors that I couldn't get out.
When I cranked up the engine, my fuel flow indication was gone. Unless I just happened to get a failed Red Cube, it seems as if oil contamination inside the spade connectors might be the cause.
Can anybody confirm this? Do I need to R&R the spade connectors? Thanks.
When I cranked up the engine, my fuel flow indication was gone. Unless I just happened to get a failed Red Cube, it seems as if oil contamination inside the spade connectors might be the cause.
Can anybody confirm this? Do I need to R&R the spade connectors? Thanks.