Hi All,
New builder here. The attached picture is the R-904 bottom rib. It is sandwiched between the rudder horn and rudder spar. I am concerned about 2 things:
1. The large hole for the Rudder rod end is way to close to the edge. I dont know of this is an issue as the rod end is not a fastener.
2. The rivet holes seem to be a bit oblong. Is this a problem?
Any thoughts would be great!
New builder here. The attached picture is the R-904 bottom rib. It is sandwiched between the rudder horn and rudder spar. I am concerned about 2 things:
1. The large hole for the Rudder rod end is way to close to the edge. I dont know of this is an issue as the rod end is not a fastener.
2. The rivet holes seem to be a bit oblong. Is this a problem?
Any thoughts would be great!
![2469ul3.jpg](/community/proxy.php?image=http%3A%2F%2Fi62.tinypic.com%2F2469ul3.jpg&hash=0d99885df7b682ba5251bd5b5fb80899)
Last edited: