Good Evening,
I have read the few other nutplate saga's on the forum and yet still am confused.
There were only 2 bags that had any nut plates, one that had just 2 and one that had many of what appeared to be 4 different types mixed.
Ultimately when I got them sorted this is what I have -
I see a lot that have -08 on them (Like the one that is second down), but I don't see ANY that are -03
Also, I have no idea how to identify the AN3 bolts so that I could just test the threads.
And before anyone says, "You should have inventoried your kit before starting", I did, the only thing on the packing list was "Nutplates" in a single bag. So I have no idea how many of each type I should have to start with.
Thoughts?
(It's almost as if they decided to eliminate the -03's and just use the -08's but didn't update the docs)
I have read the few other nutplate saga's on the forum and yet still am confused.
There were only 2 bags that had any nut plates, one that had just 2 and one that had many of what appeared to be 4 different types mixed.
Ultimately when I got them sorted this is what I have -
![100_0564-e1380368300971.jpg](/community/proxy.php?image=http%3A%2F%2Fwww.myclubplane.com%2Fwp-content%2Fuploads%2F2013%2F09%2F100_0564-e1380368300971.jpg&hash=961ef860e35daecc3f1b09c24492fda0)
I see a lot that have -08 on them (Like the one that is second down), but I don't see ANY that are -03
Also, I have no idea how to identify the AN3 bolts so that I could just test the threads.
And before anyone says, "You should have inventoried your kit before starting", I did, the only thing on the packing list was "Nutplates" in a single bag. So I have no idea how many of each type I should have to start with.
Thoughts?
(It's almost as if they decided to eliminate the -03's and just use the -08's but didn't update the docs)
Last edited: