bhassel
Well Known Member
OK, this just doesn't look correct to me.
I'm on page 16-02 installing the stall warning switch.
When I'm putting the screws AN525-8R8's into the nutplates, I feel like I re-tapping the nutplate. The screw comes out the back side looking like that's what I'm doing.
Of course the head of the screw is taking a beating as well and will need to be replaced.
I've double checked to make sure the K1000-08 nutplates installed on the rib and it appears that I have the correct screw specified in the plans.
This can't be correct. What am I missing?
Thanks,
Bob
I'm on page 16-02 installing the stall warning switch.
![Stall+Warning+Install.png](/community/proxy.php?image=https%3A%2F%2Flh5.googleusercontent.com%2F-gJXNOT9KuXI%2FUlChIV3es3I%2FAAAAAAAAA5I%2FUerwWZ8dKSE%2Fw493-h415-no%2FStall%2BWarning%2BInstall.png&hash=ff024fd870c719f0ffefce44dbc25f97)
When I'm putting the screws AN525-8R8's into the nutplates, I feel like I re-tapping the nutplate. The screw comes out the back side looking like that's what I'm doing.
![stall+warning+nutplate+screw.jpg](/community/proxy.php?image=https%3A%2F%2Flh6.googleusercontent.com%2F-Uw4nueGAx68%2FUlCgDC2v2cI%2FAAAAAAAAA4c%2FzARc_wprr4Q%2Fw697-h393-no%2Fstall%2Bwarning%2Bnutplate%2Bscrew.jpg&hash=a20de7e52278b19d215fbb1de8876bd7)
Of course the head of the screw is taking a beating as well and will need to be replaced.
![stall+warning+nutplate+screw+head.jpg](/community/proxy.php?image=https%3A%2F%2Flh6.googleusercontent.com%2F-eYh4IWE_plE%2FUlCgCqwJPSI%2FAAAAAAAAA4Y%2F0GWfDttdgUc%2Fw697-h393-no%2Fstall%2Bwarning%2Bnutplate%2Bscrew%2Bhead.jpg&hash=2753aba4a3975ab42caeb9f8a1340633)
I've double checked to make sure the K1000-08 nutplates installed on the rib and it appears that I have the correct screw specified in the plans.
This can't be correct. What am I missing?
Thanks,
Bob