Pmerems

Well Known Member
Advertiser
Gents,

I have been inspecting my RV-7A nose wheel during the early testing flights and noticed grease being slung (no better term) from the wheel bearing.

Nose-Wheel-grease-slinging.jpg


The other side doesn't show any signs of this. Any thoughts? Is this normal?

Thanks,
 
Last edited by a moderator:
I don't know if it's "normal" or not, but mine is doing the same thing, on the starboard side only. I have the Matco axle installed.

Larry
 
The felt seals are suppose to keep this from happening. I would check them first and make sure you did not use to much grease when you packed the bearings.