A

aussieflyer1

Well Known Member
I left PMP a couple of weeks age and today returned back into mode C area. The PMP tower let me know that they had my transponder but NO mode C.
Any ideas were i should start to look other than my encoder and loose connections.
Just had the RV6A wrapped at Aircraft Wraps at F45 Florida and what a great job also lighter that the paint was going to be.
 
Which transponder and encoder? I had the same problem which turned out to be an incorrect setting in my Dynon D100 which I use for transponder altitude.
If you give more details of your equipment one of the gurus should chime in.
 
saw the plane being worked on last week. nice. got any pics for everyone.

find the encoder and check all connections. i would start there first. :)
4c0910bbf5d5fedb8819c826a2239faa.jpg
 
I'll be at my hangar in PMP every morning next week. Stop by and I'll help you figure out the problem.

Lenny
 
No Mode C

turbo said:
saw the plane being worked on last week. nice. got any pics for everyone.

find the encoder and check all connections. i would start there first. :)
4c0910bbf5d5fedb8819c826a2239faa.jpg
Click to expand...

Turbo
Have to meet you one of these days as I have heard a lot about you. Scott has the pics and i think he was going to post them. I don't know how to do it otherwise i would.
Send me your email. [email protected]
 
You must log in or register to reply here.