[doctornigel]

I've just removed my HS and my elevators for the n-th time. When it comes to the "final" install, should I use new nuts? The real question is, does the whitish nylon insert wear and lose some ability to prevent backing out at a future date? I do plan on painting a little mark (special paint) on the nut as a quick check for movement. Thanks!

 

[Mike S]

Short answer, YES!!!!

 

[Mel]

Nyloc nuts may be reused as long as they cannot be turned by hand.

 

[TSwezey]

It's the only thing that keeps you flying level! Your choice! I bought new ones.

 

[pierre smith]

Don't use nyloc nuts...

I've just removed my HS and my elevators for the n-th time. ......... Thanks!

.....but use castellated nuts or store bought cheapies for fitments then use new nylocs for final installation.

Regards,

 

[RV10inOz]

.....but use castellated nuts or store bought cheapies for fitments then use new nylocs for final installation.

Hate to be a party pooper, but I would not have store bought cheapies in the place. You will only forget one once..................

Use the Nyloc, and if its only on and off once fine, if its getting a bit sad install a new one.

They are a lot cheaper than the alternative!

DB