Hello. I was chugging along on my HS when I realized I left the blue plastic on the inside of the skin (not along the rivet lines at least). The area forward of the front spar is inaccesible. If I drill off HS706 I can get the plastic off, but will need to reattach with blind rivets. Or I could leave the plastic in there as my dirty little secret. Other than calling Van's for the ok on blind rivets, any suggestions? Thanks. Burt
P.S. HS706 is only riveted to the spar, not the skin at this point, so not a big deal to get it off.
P.S. HS706 is only riveted to the spar, not the skin at this point, so not a big deal to get it off.