[robertb328]

I didn't get the OP-22 drawing with my FWF parts and cannot find it on Van's website to order. Does anyone have it in a form that it can be emailed. If so, I would appreciate it.

[email protected]

 

[wirejock]

OP dwg

I'm not sure what OP-22 is but you can call Vans and they will e-mail it.

 

[bruceh]

OP-22 isn't on the CD-ROM, otherwise I'd send it to you! It isn't listed in the "List" of Van's Parts, either. Maybe it has been superceeded by another drawing, or it no longer exists?

 

[robertb328]

I couldn't find it either. Perhaps it has been superseded. It is supposed to be the drawing for the IO-360 throttle/mixture kits.

 

[gerard_opio]

OP-22

Robert,

I just emailed it to you. It was on the CD ROM I recd a couple weeks ago.

David

Could you send me a copy of OP-22 drawing? It's for a IO-320 but I hope it is the same as for the IO-360.

Gerard

 

[gerard_opio]

no OP-22 for IO-320 or vertical induction engines

I got the following answer from Van's support:
_________________________

The Firewall Forward Drawings should cover all of the engine installations. The YIO-320- D1A will be more similar to the carburated version of the engine. DWG OP-22 covers the Horizontal Induction engines which you do not have. Look at DWG OP-26 for the Throttle Cable installation. The Mixture will be very similar but on the opposite side of the injection servo.
Joe Blank
Project Manager - Builder Support

-------------------------------------
thanks for your help.