[Bushcaddy]

I can't seem to locate these. Tried ACS, MCMaster and an internet search. Found the manufacturers but no on-line source. These are often used on carbs and the tabs bend down/up to prevent the nut from turning and sometimes they have a tab with a hole for adding safety wire.
Thanks.

 

[bhester]

Carb parts

http://www.airpartshopping.com/main.sc

 

[Bushcaddy]

found them

Thanks for the link...wish I knew the part number.

I racked my brain and decided to search for "safety wire washer"...turns out ACS has them: http://www.aircraftspruce.com/catalog/topages/safetywirekits1.php

Thanks

 

[bhester]

Part #

I don't think the ones you found will work as the correct ones.
The part # is 78-A97
http://www.airpartshopping.com/product.sc?productId=2646&categoryId=42
or
Search on Aircraft Spruce bring up this:
08-06852 78-A97-F VOLARE LK TAB WASHER $3.050

 

[Bushcaddy]

Got it

Bobby,

Thanks for the help, I ordered some from Airparts.

Don

 

[Brantel]

Spruce has em here.

AERO has em here.

 

[alpinelakespilot2000]

Now that we have sources, does anyone have a picture showing how they are supposed to be installed?

 

[Brantel]

Best I can do:

 

[alpinelakespilot2000]

Best I can do:

Thanks. I was thinking the tab washers that hold the FAB top plate to the carb, but I have wondered what would happen if I ever needed to replace that one too. My mistake.