I just completed a panel upgrade on my RV 10 and now I am having problems with my PS Engineering SR audio panel. Everything works fine except the copilots intercom doesn’t transmit out . They can hear but no one can receive. If the PTT is used, they can hear themselves and everyone else can hear also. Here is what is driving me and everyone who has looked at this problem crazy.
I did not replace or change anything having to do with the audio panel or its wiring. In the event something failed in the audio panel itself, I borrowed an exact unit and the problem stayed the same. I replaced the plugs and nothing changed. I ran a new wire with new pins back to the unit and nothing changed.
I made sure tHe shield was grounded and still no voice out for the copilot unless the PTT is activated.
I can’t think of anything else to do except learn sign language to communicate with the copilot. All ideas are welcome please.
Sam Butler
817-821-7971
I did not replace or change anything having to do with the audio panel or its wiring. In the event something failed in the audio panel itself, I borrowed an exact unit and the problem stayed the same. I replaced the plugs and nothing changed. I ran a new wire with new pins back to the unit and nothing changed.
I made sure tHe shield was grounded and still no voice out for the copilot unless the PTT is activated.
I can’t think of anything else to do except learn sign language to communicate with the copilot. All ideas are welcome please.
Sam Butler
817-821-7971