Hi guys
right now I am planning to purchase the circuit breakers and switches for my avionics. my panel layout (it is already cut) is attached. my questions:
- Landing Lights:
i have two, one left, one right. Is a 10Amp CB sufficient? (to use for both Lights)
- Whelen Strobes/Nav:
I would like to installl the Microburst 2 Kit from Whelen. What CB do I have to use if I would like to have one CB for both (Strobes and Nav)?
- Avionic Master Switch:
Which switch did you guys use as a Avionic Switch (to switch on/off all avionic items)? This would include Dynon EFIS+EMS+SL30+GPS 496+TXP (TT21 Trig)+AutoPilot(TrueTrak and AltTrack)? I am not quite sure, as the sum of all Amps is around 25-30, which would be too high for the normal switches, correct? What should I do?
- Autpilot:
I have the Autopilot TrueTrack and AltTrack (Altitude and Course). Should I use an own Autopilot Master switch or are the On/Off Buttons sufficient enough on the instruments?
- GPS Mouse:
I have a GPS GArmin 496. Which GPS Mouse should I use as the primary GPS source?
Trim / Flaps:
Can somebody recommend using the EFIS 100 as an indicator for the Trim and Flaps or is it too complex to get connected to the EFIS?
Thank you very much guys!
Cheers and best regards from Germany!
Sunit (RV9a)
right now I am planning to purchase the circuit breakers and switches for my avionics. my panel layout (it is already cut) is attached. my questions:
- Landing Lights:
i have two, one left, one right. Is a 10Amp CB sufficient? (to use for both Lights)
- Whelen Strobes/Nav:
I would like to installl the Microburst 2 Kit from Whelen. What CB do I have to use if I would like to have one CB for both (Strobes and Nav)?
- Avionic Master Switch:
Which switch did you guys use as a Avionic Switch (to switch on/off all avionic items)? This would include Dynon EFIS+EMS+SL30+GPS 496+TXP (TT21 Trig)+AutoPilot(TrueTrak and AltTrack)? I am not quite sure, as the sum of all Amps is around 25-30, which would be too high for the normal switches, correct? What should I do?
- Autpilot:
I have the Autopilot TrueTrack and AltTrack (Altitude and Course). Should I use an own Autopilot Master switch or are the On/Off Buttons sufficient enough on the instruments?
- GPS Mouse:
I have a GPS GArmin 496. Which GPS Mouse should I use as the primary GPS source?
Trim / Flaps:
Can somebody recommend using the EFIS 100 as an indicator for the Trim and Flaps or is it too complex to get connected to the EFIS?
Thank you very much guys!
Cheers and best regards from Germany!
Sunit (RV9a)