[tikicarver]

I got an old Ingersol-Rand dirill from a garage sale.
It was missing the chuck key.
Anyone know where I can find one?

the hole for the key small, .152"

https://lh5.googleusercontent.com/-jm2X2nwEIMg/UPZGgX3ZkYI/AAAAAAAAAVU/Nd_465PfU9I/s640/IMAG0353.jpg

 

[bruceh]

Check your big box store (Lowe's or Home Depot). I had to find one for an old drill press and they had one.

 

[Steve -7]

Try Mcmaster-carr, looks like it might take a K0 key, it will have a 1/8 pilot. A K1 key will have a 5/32 pilot.


http://www.mcmaster.com/#keys-for-jacobs-and-rohm-drill-chucks/=l22fgv

 

[bird]

Harbor freight had a multiple ratchet one when I was looking, maybe one of them would fit

Bird

 

[comfortcat]

How about keyless?

Why not just knock it off, and install a keyless? Not real expensive and easier in the shop! I replaced all my drill chucks from cordless drills with no batteries!

Note: On reversible, be sure to remove the screw before trying to remove the
chuck. AND the screw is usually left hand threads...

CC

 

[tikicarver]

Harbor Freight one doesn't work, box stores don't have one either
I will try Mc Master Carr
thanks for the tips

 

[tikicarver]

found a really good reference for drill chucks and keys

http://www.amradtools.com.au/pdf/sep/DrillChucksAccessories.pdf