skyking902001
Well Known Member
I know I'm not building a space shuttle, but also don't want the wheels (or tail) to come off of my truck. In riveting the 706 nose rib and 704 root rib to the 702 front spar of the VS, I ended up with a .025 gap between the nose rib and spar on one rivet. Not sure if this is acceptable, but sure don't want to attempt to drill this out if not necessary. The pic does not show the gap real well, but it is there-measured it with a feeler guage. Also, I drove two rivets one direction and the offending rivet driven opposite direction--brain fade! Advice/comments appreciated.
Thanks,
Sky
8/8A?
Sky
8/8A?