[N941WR]

Could someone help me locate a Tee fitting for use with the following tubes:

1/4" ID tube on the straight or top of the Tee.
1/4" OD tube on the tail of the Tee.

and
I will need a Tee that is only for 1/4 OD tube.

I check Aircraft spruce and they don't list such a thing.

This is required for my Pmags manifold pressure connection.

Thanks!

 

[RV7Guy]

NAPA

I got mine at a local Napa store. They may have them in a bin behind the counter. They had the exact ones I needed for the same purpose!!!

 

[airguy]

1/4" ID tube is commonly 3/8" (or very close) OD.