I just either need to modify the standard RV 7A step, making it wider(stepwidth) or buy one with a wider step. This is so I can step up with my good leg and bring up the prosthetic leg, put my wieght on the prosthetic leg and step on to the wing. This sounds more complicated than it is. I don't have a knee so I need to use the good side to do the work, kinda like the Humpback of Notre Dam. ;-)
I don't have faith in my welding, and want a good job. If I cut off the step and weld on a new one, I have an aligment issue, unless I make a jig. Sooo, I thought I would just find the manufacturer and have him make one with a wider step. If your guy can do this, I have the original step and a piece of streamlined tubing long enough to do the job, just no TIG welder. CJ