Desert Rat
Well Known Member
Hey guys- I'm positioning the canopy frame in the canopy in preparation for drilling the hole for the latch handle.
As those of you who have gone before know, the plans are somewhat vague in tis area and just say something to the effect of "position for best fit." I also understand that ultimately the plexi needs to overhang teh aft bows by about 0.5-1.0"
I think I'm there, but just want to ask for some confirmation before I drill the hole.
I'm ending up with the center aft bow/spine joint about 2" forward of the forward edge of the canopy aft mold line. Does this sound about right?
I just have paranoid visions of getting the windscreen ridiculously short if I get this wrong and I have room to slide the frame a little further aft if need be.
Thanks!
As those of you who have gone before know, the plans are somewhat vague in tis area and just say something to the effect of "position for best fit." I also understand that ultimately the plexi needs to overhang teh aft bows by about 0.5-1.0"
I think I'm there, but just want to ask for some confirmation before I drill the hole.
I'm ending up with the center aft bow/spine joint about 2" forward of the forward edge of the canopy aft mold line. Does this sound about right?
I just have paranoid visions of getting the windscreen ridiculously short if I get this wrong and I have room to slide the frame a little further aft if need be.
Thanks!