RV-14A
Standard build, 95% Complete
Tip up Canopy (of course)
S/N 140626
Located near Tampa at KZPH
Asking $210K
VFR
Link to photos of completed fuselage, interior photos and wings.
https://photos.app.goo.gl/Fone81ti2BJqZLHN6
Recent major surgery required surrender of my medical certificate, forcing me to essentially give up flying.
All construction by myself. Three previous RV’s brought to completion.
All components are factory new, never used previously.
Remaining to complete:
Complete and Install wheel and strut fairings
Cowl fitting touchup (minor)
Hang the completed wings and tips. Wings wired and fitted with FlyLeds Seven Stars landing lights, AeroFlash Position and Strobe lights. GRT Magnetometer, GRT autopilot servo, Ray Allen trim servo
Install steps
Install Antennas
Empennage complete and installed requiring installation of fairings.
Flightline Interiors seats and side panels require installation as does Crow 5 point harnesses
A bit of wiring remains: Complete the canopy switch and warning light, adding an aux power socket and a couple of minor odds and ends on the panel.
Engine installation complete
Lycoming I/O 390 Thunderbolt Painted Red AND NO 2 YEAR WAIT
Dual B&C Alternators
Hartzell C/S 74” propeller
Dual Slick Magnetos
Other equipment:
Electric Trim Elevator and Aileron
Ray Allen Sticks
ACK 406 MHz ELT
Grand Rapids Technology:
1 – 10.1 Horizon EFIS Touch Screen for flight planning, Auto Pilot included.
1 - 10.1 Sport EFIS
1 – GRT Mini EFIS
Garmin GMA245 Audio Panel
2 Garmin GTR 200 Com Radios
1 Garmin GTX325 Transponder Mode C Xpndr Using Echo ADSB
Uses “Old School” circuit breakers on all circuits.
Engine baffles powder coated as well as other miscellaneous interior panels. ( See Photos)
Extra switches and wire included
Contact
Carl Raichle
[email protected]
(813) 239-4019
Located at KZPH in Zephyrhills FL, just NE of Tampa, FL
Standard build, 95% Complete
Tip up Canopy (of course)
S/N 140626
Located near Tampa at KZPH
Asking $210K
VFR
Link to photos of completed fuselage, interior photos and wings.
https://photos.app.goo.gl/Fone81ti2BJqZLHN6
Recent major surgery required surrender of my medical certificate, forcing me to essentially give up flying.
All construction by myself. Three previous RV’s brought to completion.
All components are factory new, never used previously.
Remaining to complete:
Complete and Install wheel and strut fairings
Cowl fitting touchup (minor)
Hang the completed wings and tips. Wings wired and fitted with FlyLeds Seven Stars landing lights, AeroFlash Position and Strobe lights. GRT Magnetometer, GRT autopilot servo, Ray Allen trim servo
Install steps
Install Antennas
Empennage complete and installed requiring installation of fairings.
Flightline Interiors seats and side panels require installation as does Crow 5 point harnesses
A bit of wiring remains: Complete the canopy switch and warning light, adding an aux power socket and a couple of minor odds and ends on the panel.
Engine installation complete
Lycoming I/O 390 Thunderbolt Painted Red AND NO 2 YEAR WAIT
Dual B&C Alternators
Hartzell C/S 74” propeller
Dual Slick Magnetos
Other equipment:
Electric Trim Elevator and Aileron
Ray Allen Sticks
ACK 406 MHz ELT
Grand Rapids Technology:
1 – 10.1 Horizon EFIS Touch Screen for flight planning, Auto Pilot included.
1 - 10.1 Sport EFIS
1 – GRT Mini EFIS
Garmin GMA245 Audio Panel
2 Garmin GTR 200 Com Radios
1 Garmin GTX325 Transponder Mode C Xpndr Using Echo ADSB
Uses “Old School” circuit breakers on all circuits.
Engine baffles powder coated as well as other miscellaneous interior panels. ( See Photos)
Extra switches and wire included
Contact
Carl Raichle
[email protected]
(813) 239-4019
Located at KZPH in Zephyrhills FL, just NE of Tampa, FL