terry.mortimore
Well Known Member
Hi Gang: I requested a PAPR report from Nav Canada’s new report service. I have the UAvionics tail beacon X installed for about a year now and the FAA report I requested was successful and it has been working well for the last year since it was installed.
I’ve always wondered if the satellite side of the system was working as it should. When I seen that Nav Canada has the PAPR service I decided to run a report from yesterday’s flight.
I’ve attached the report to this post. Everything looks OK, except for two items in the missing elements section at the bottom of the first page. The boxes labeled Flight ID and Mode 3 A are shown as not acceptable.
The User Guide is not much help, I don’t know if I have a problem or not.
I’d appreciate any input. Terry
I’ve always wondered if the satellite side of the system was working as it should. When I seen that Nav Canada has the PAPR service I decided to run a report from yesterday’s flight.
I’ve attached the report to this post. Everything looks OK, except for two items in the missing elements section at the bottom of the first page. The boxes labeled Flight ID and Mode 3 A are shown as not acceptable.
The User Guide is not much help, I don’t know if I have a problem or not.
I’d appreciate any input. Terry