RV7Ron
Well Known Member
I'm putting together the leading edge sub-assembly for my left wing and I have a mystery access hole. Left wing, bottom side, near the tie-down and pitot area there is a non-joggled square access hole of some kind. I dont see it in the drawings and I cant for the life of me figure out why its there.
Not sure if this is pertinent information, but the part (and inventory matches) is labeled W-701-L-1 and the drawing shows a W-701-L (without the -1). Also, the right side doesnt have this access hole.
Is my skin correct and if so, what is that hole for? I was hoping I could get this answered on good ol' VAF, otherwise I'll have to ask Van's monday morning. I tried posting pics...not sure if it worked?
Not sure if this is pertinent information, but the part (and inventory matches) is labeled W-701-L-1 and the drawing shows a W-701-L (without the -1). Also, the right side doesnt have this access hole.
Is my skin correct and if so, what is that hole for? I was hoping I could get this answered on good ol' VAF, otherwise I'll have to ask Van's monday morning. I tried posting pics...not sure if it worked?