[Kevin Horton]

I'd like to order a few spare screws and washers for the spinner on my MT prop. I can't find the part numbers in any of the docs that came with the prop, nor can I find them on the MT web site. I tried e-mailing the vendor I bought the prop from, but got no response. Maybe one of our e-mails got caught in spam trap.

Does anyone know what the part numbers are of those screws and washers? Are they standard aviation parts that I can buy from ACS, etc? Or, do I need to source them from MT?

 

[andrewbutler]

Same question

Hi Kevin,

I have the same question. Did you ever get an answer?

I just mounted my MTV-12 prop and spinner to do the cowling. You were asking for spares. Did you get some with the spinner originally? I have none at all.

I have emailed MT this morning for the spec. of the screws and washers. I'll let you know what they say. I also asked a fellow builder here in Ireland who has an MTv-12 up front.

Regards,

Andrew Butler,
RV7 EI-EEO.

 

[Kevin Horton]

I e-mailed MT in late November, and got a very quick response:

The part number of this screws is AN 526 C 1032 R8.

They didn't give a part number for the washers - I'll try again if you don't have any luck.

I didn't receive any spare screws or washers with my spinner.