[grahambo]

I have a Jihostroj P-920-032A. My VA-153 governor cable bracket mounting holes do not exactly align with screw holes in governor. I’m thinking a slight enlargement of the bracket holes would be an acceptable fix. Comments, ideas please. Thanks

 

[Tommy123]

Sure, don't go nuts though.

 

[D-Dubya]

Define "slight". If you're enlarging the diameters 1/32", which is essentially taking the powder coating off, I agree, you should be fine. You may be able to get away with a little more than that.

Put some primer or paint on the bare steel to keep it from rusting. That bracket ain't easy to get to when it's mounted.

 

[grahambo]

Thanks for the advice. 1/32" should be enough and it does look as if the powder coat is responsible for the alignment issue.