I need to mount a bulkhead fitting on the belly of my RV8 to vent my EXT900 battery.
I have a single fitting from Earthx that requires a 1.125" hole that mounts both fittings. It's a screw type bulkhead fitting.
Alternatively, I could mount 2x .25" fittings that would require a 5/8" hole for each.
The holes would be on the bottom, around the aft baggage compartment. The aircraft is finished, painted, and flying.
Thoughts?
I have a single fitting from Earthx that requires a 1.125" hole that mounts both fittings. It's a screw type bulkhead fitting.
![1.png](/community/proxy.php?image=https%3A%2F%2Fearthxbatteries.com%2Fwp-content%2Fuploads%2F2018%2F09%2F1.png&hash=7c3997c12246b7a8dad69a61a4979029)
Alternatively, I could mount 2x .25" fittings that would require a 5/8" hole for each.
![prd_790.jpg](/community/proxy.php?image=https%3A%2F%2Fwww.tanksinc.com%2Fcartimages%2Fprd_790.jpg%3Fid%3D202010211302560&hash=24b1457a30bb7a083692b99f979bf8da)
The holes would be on the bottom, around the aft baggage compartment. The aircraft is finished, painted, and flying.
Thoughts?
Last edited: