[Michael Burbidge]

I'm using Aeroflash strobe and position lights. The tail strobe/position light is about 1/2" larger in diameter than the mounting platform on the rudder bottom fiberglass tip.

How did you mount your Aeroflash strobe/position light on the rudder? Did you build out the existing mount with fiberglass? Mount somewhere else?

Do you have pictures?

Thanks,
Michael-

 

[n82rb]

cut to fit and re-glass.

bob burns
RV-4 N82RB

 

[PaulRV6]

I cut off the original mount and reglassed a new one. I epoxied in an aluminum
bushing that I tapped to accept the mounting screws.

Paul
RV-6