digidocs
Well Known Member
Hi there,
I just sent an email to Vans about this, but thought VAF might have good input as well:
The question is whether it would be okay to remove the metal beneath the purple line on the fuselage frame shown. The line is drawn to provide 2D edge distance.
This would be advantageous because it would allow the J stiffeners to be back riveted to the skins before installing the skins on the frames. I think this would be significantly easier and reduce the amount of time my bucking partner (wife) has to spend in the aft fuselage!
Thanks for the advice,
David
I just sent an email to Vans about this, but thought VAF might have good input as well:
The question is whether it would be okay to remove the metal beneath the purple line on the fuselage frame shown. The line is drawn to provide 2D edge distance.
This would be advantageous because it would allow the J stiffeners to be back riveted to the skins before installing the skins on the frames. I think this would be significantly easier and reduce the amount of time my bucking partner (wife) has to spend in the aft fuselage!
Thanks for the advice,
David