D

Daniel S.

Well Known Member
Hey all-
Does anyone off hand know of a rivet similar to the MK-319-BS (7/64 or 3/32) flush-blind-cherry rivet with a longer with a grip length? the MK -319-BS grip length is only 1/8". I need something slightly longer & can seem to find such a rivet without moving up to a #4 rivet.

Thanks
 
Equivalent?

Looking at the ACS chart, it would appear the next one up with a longer grip is cherry rivet 04-01955 or a SSD32BS "pop" rivet. The rivet diameter is the same at 3/32" but the grip lenght is .271 verses the .125 of the MK319BS. Just not sure if it is a flush one. I'm sure the experts on here can help out with that.

The link to ACS is :

http://www.aircraftspruce.com/catalog/hapages/cherrynrivet.php

Cheers,

Don
 
All the Pop Rvets in the world are listed and defined here - well not quite, but almost...:)

http://www.hansonrivet.com/w18.htm

MK321BS has a grip to 0.110 - Note the MK319BS has a real grip of only 0.090

Pick the other tabs on the page for other rivet construction...
 
Thank you Gill!!!
Now the quest to find where I can buy MK-321-BS rivets. I litterally only need a few. It looks like the only folks that have them are the wholesale supply houses... GRRR!
 
You must log in or register to reply here.