[RV6AussieNick]

Hi Guys,

I'm getting close to mounting and rigging my Hori Stab and Vert Stab on my RV6, I've been reading threw my construction manual only to find more missing Figure photo's.

I'm after all of section 8 The Fuselage, Fig 8-10, Fig 8-11, Fig 8-12 (RV7 would be the same) the photo's show rigging and setting up the empennage, I'm not sure what happened to the photo's, I'm the 4th owner.. I've found that I'm missing a few other parts of the manual.

Thanks for your help.

Cheers,

 

[airtractor8]

Hi Nick

Here is the emp attach instructions from my circa 1993 RV6 builders manual with the relevant sketch page

http://i47.tinypic.com/2wognc8.jpg
http://i47.tinypic.com/v5lg8j.jpg


Hope it helps

Cheers
Graham in West Aus

 

[RV6AussieNick]

that's what I'm looking for..

Hi Graham,

Thanks for the photo and instructions, that's exactly what I'm looking for.

Your instructions look to be the same as what I have, my manual is around 20 yrs old so at some point most of my figure drawings and photos have gone missing.

Cheers

 

[airtractor8]

Hi Graham,

Thanks for the photo and instructions, that's exactly what I'm looking for.

Your instructions look to be the same as what I have, my manual is around 20 yrs old so at some point most of my figure drawings and photos have gone missing.

Cheers

Your more than welcome to PM me if you need any more info and I'll dig it out and send it to ya